Job Description
The Test Engineer assists in testing components and systems for use in mining equipment.
Responsibilities
Test Engineer 1:
- Works with Engineers and Technicians performing tests on mining products, equipment, or systems.
- Participates in Engineering Development Program.
- Follows established test procedures to perform engineering tests.
- Work independently or as a team member with other engineers, technicians, and field personnel on projects.
- Writes technical reports of analytical test results and observations.
- Sets up data acquisition equipment and sensors in preparation for testing activities.
Test Engineer 2:
- All duties of Test Engineer 1, plus:
- Sets up and performs tests on products, equipment, or systems according to test procedures.
- Reads and follows test procedures to perform testing activities.
- Works with other Engineers to research and analyze the best method to test a specific component or truck sub-system.
- Installs and operates data acquisition equipment and sensors required for a particular test.
- Reads and interprets maintenance and operators manuals, technical drawings, basic electrical or hydraulic schematics, engineering specifications, and reports.
- Writes a technical report at the completion of a test and provides feedback to the requesting Engineer on the results.
- Uses PC based data analysis software to verify data integrity at the time of testing.
- Works independently or as a team member with other engineers, technicians, and field service personnel to complete a testing project.
Test Engineer 3:
- All duties of Test Engineer 2, plus:
- Researches, plans, sets-up, and supervises or performs tests on products, equipment, or systems according to test procedures or best practices.
- Assists with writing test procedures to perform engineering tests on new and existing products or systems.
- Analyzes test data and writes technical reports of test results. Uses the data, observations, and engineering experience to draw conclusions from the results and compare to the engineering.
- specification if available. Determines root cause of failure or makes recommendations for improvement.
- Directs the work of Technicians for the duration of a particular test.
- Interprets national and international standards (ISO, SAE, etc.) documents and designs tests to meet all requirements.
- Proposes, researches, designs, and analyzes new in-house test equipment.
- Researches and makes recommendations for the test equipment or sensor type required to perform a certain test.
- Leads the testing activities required for R&D research projects into new truck technologies.
- Leads Test Engineers or Technicians in the installation and operation of data acquisition equipment and sensors required for a particular test.
- Works with major component suppliers (engine, drive system, etc.) or customers on joint test projects.
- Acts as the point of contact for the Test Group.
Test Engineer 4 (Senior):
- All duties of Test Engineer 3, plus:
- Trains, mentors, and develops Engineers and other personnel on procedures, advanced data analysis concepts, and best practices related to testing.
- Researches and writes test procedures to perform engineering tests on new and existing products or systems that comply with accepted industry standards.
- Acts as the technical expert for the engineering department in specialized areas of complex system troubleshooting and test measurement technology.
- Leads Truck or System Verification and Validation planning through execution to include system certification.
- Works with Engineering, Sales and Product Management to review customer requirements to ensure products meet national or international standards.
- Plans and executes multiple projects in parallel including resource allocation and logistics.
Competencies
Education and Experience:
- Test Engineer 1: A Master Science Degree or Master of Engineering Degree (M.S./ M.E.) or, a Bachelor of Science Degree (BSME/MET) or, Associate of Science Degree (ASEE) with 10 years of relevant mechanical experience in an engineering environment.
- Test Engineer 2: A Master Science Degree or Master of Engineering Degree (M.S./ M.E.) with 1 year of relevant mechanical experience in an engineering environment or, a Bachelor of Science Degree (BSME/MET) with 2 years of relevant mechanical experience in an engineering environment.
- Test Engineer 3: A Master Science Degree or Master of Engineering Degree (M.S./ M.E.) with 4 to 6 years of relevant mechanical experience in an engineering environment or, a Bachelor of Science Degree (BSME/MET) with 6 to 8 years of relevant mechanical experience in an engineering environment.
- Test Engineer 4 (Senior): A Master Science Degree or Master of Engineering Degree (M.S./ M.E.) with 6 to 8 years of relevant mechanical experience in an engineering environment or, a Bachelor of Science Degree (BSME/MET) with 8 to 10 years of relevant mechanical experience in an engineering environment.
Test Engineer 1:
- Working knowledge of 3D drafting tools, CAD or numerical analysis tools and software.
- Knowledge of drafting tools or Computer-Aided Design (CAD) or drafting equipment and software.
- Knowledge of basic electrical and computer concepts.
- Knowledge of the application and use of basic sensor and data acquisition concepts and best practices.
- Ability to read and interpret documents such as safety rules, operating and maintenance manuals, and engineering test procedures.
- Skilled in work with mathematical concepts such as algebra, calculus, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply basic engineering concepts to practical situations.
- Ability to carry out instructions furnished in written, oral, or diagram form.
Test Engineer 2:
- Demonstrated proficiency of Test Engineer 1, plus:
- Skilled in common sense understanding to carry out instructions furnished in written, oral, or diagram form.
- Skilled in the application and use of basic sensor and data acquisition concepts and best practices.
- Skilled in the installation and configuration of truck software.
- Ability to adapt to diverse testing situations and challenges at customer’s site, supplier’s site, or in-house test lab.
- Ability to understand and troubleshoot system logic.
- Knowledge of the interpretation of Finite Element Analysis (FEA) and Durability concepts.
- Knowledge of advanced data acquisition concepts and analysis techniques required for tests such as noise, vibration, and metal fatigue.
- Knowledge of technical fundamentals of mining truck operation and control.
- Knowledge of basic low voltage controls and electrical circuits.
- Knowledge of basic mobile equipment hydraulics.
- Knowledge of using basic data displays such as time history plots and histograms.
- Utilizes business ERP systems to check parts availability or search for Bill of Materials (BOMs) and engineering drawings.
Test Engineer 3:
- Demonstrated proficiency of Test Engineer 2, plus:
- Skilled the interpretation of Finite Element Analysis (FEA) and Durability concepts.
- Skilled in technical fundamentals of mining truck operation and control.
- Skilled in basic mobile equipment hydraulics.
- Skilled in basic low voltage controls and electrical circuits.
- Skilled in using basic data displays such as time history plots and histograms.
- Skilled in using basic electrical and computer concepts to perform testing activities.
- Skilled in understanding and troubleshooting system logic.
- Knowledge of test planning and managing projects.
- Knowledge of AC drive system controls and its application on mining trucks
- Knowledge of the application and use of advanced sensor and data acquisition concepts and best practices.
- Ability to apply advanced engineering concepts to practical situations.
- Skilled in adapting to diverse testing situations and challenges at customer’s site, supplier’s site, or in-house test lab.
Test Engineer 4 (Senior):
- Demonstrated proficiency of Test Engineer 3, plus:
- Knowledge of financial data and cross-functional costing procedures.
- Skilled in acting as the technical expert in at least one advanced testing concept such as noise, vibration, or metal fatigue.
- Skilled in the application of test planning and managing projects.
- Skilled in AC drive system controls and its application on mining trucks.
- Skilled in applying advanced mobile equipment hydraulic concepts to testing programs.
- Skilled in the application and use of advanced sensor and data acquisition concepts and best practices.
- Skilled in using the latest electrical and computer concepts to perform testing activities.
- Skilled in applying advanced engineering concepts to practical situations.
- Ability to engage in advanced engineering discussions and correspondence.
- Experienced, skillful negotiator able to find consensus within a group with diverse opinions.
- Excellent presentation skills.
- Ability and willingness to make decisions of consequence.
- Skilled in planning, managing, and directing resources and managing projects including the use of project management software .
Additional Requirements:
- Is expected to travel nationally and internationally up to 30% to customer or supplier sites.
- Ability to complete and maintain mine certifications or safety training such as Mine Safety and Health Administration (MSHA) hazard training.
- Ability to obtain and maintain a valid driver’s license and passport.
Our Offer
An interesting and ambitious role in a successful international company. We offer a secure work environment with a comprehensive benefits package that includes major medical, dental and vision insurance, 401K plan with company match, paid vacation and personal days and competitive salary.
Referral Bonus: Tier III
Have we awoken your interest? Then we look forward to receiving your online application. If you have any questions, please contact Thomas Steele.
Liebherr-America, Inc. and its US affiliates are Equal Opportunity Employers. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
If you are a California resident, please visit Liebherr USA, Co. Privacy Statement for more information regarding how Liebherr-America, Inc. and its US affiliates collect and process your personal information.
One Passion. Many Opportunities. The Company
In line with its international growth, Liebherr’s venture into the United States began in 1970. Within a couple of years, the company expanded and completed its production facilities in Newport News, Virginia, for its product line of hydraulic excavators. It was later converted into Liebherr’s manufacturing facility for mining trucks and remains home to Liebherr Mining Equipment Newport News, Co. In addition to its production facility, Liebherr markets a wide variety of products and technologies its companies located across the United States. The companies are Liebherr-Aerospace Saline, Inc., Liebherr Gear Technology, Inc., Liebherr Automation Systems, Co., and Liebherr USA, Co., the umbrella company for eight divisions that are positioned across the United States.
Location
Liebherr Mining Equipment Newport News Co.
4100 Chestnut Avenue
23607 Newport News, VA
United States (US)
Contact
Thomas Steele
trey.steele@liebherr.com
Job Tags